VIDEOS OF HOW TO CAMPERIZE VANS WHERE YOU CAN SEE HOW TO INSTALL A BED IN YOUR VAN WITH YOUR OWN HANDS AND WITHOUT THE NEED OF HOMOLOGATION.

This is one of our main explainer videos where we show you a very simple and quick way to camperize your van or simply install a self-installing bed in your camper van. In this video we have chosen as a sample a Ford Transit Custon without rear air conditioning to show how easy it is to install a bed in your van and a few more accessories and turn it into a camper van in just a few minutes. All our beds for vans are designed specifically for each model, our beds fit to the millimetre around the interior contour of the van, we always make the most of the useful space of the van. In this video you can see one of the models that we normally design in our camper vans, specifically the wide module bed kit to which we have incorporated the footboard and the large drawer.

Video explaining our way of camperizing vans mainly with our beds for vans made in collaboration with Volkswagen in Barcelona and Camper Ruteros, in this case we have equipped a Volkswagen Transporter two-seater front with wide module bed, 4in1 module with sink and feet of bed. In this video we wanted to highlight several aspects of our self-installing kits for vans, one of them is the configuration in two positions chair mode that all our beds for vans come standard, in turn we also wanted to highlight the possibility that all our beds for vans have to add the optional feet of bed, an optional that allows you to remove all the second row seats and have more cargo space as well as the possibility to convert the footboard into a table for indoor or outdoor use and finally, the 4in1 version that all our van beds for both Volkswagen and Ford can incorporate to the rear bed kit.

Kit Cama in Ford Transit Custom, video made by Ford Mintegui, official Ford dealer in the Basque Country. Our kits are designed to camperize the vans in a simple way and without modifying the interior of the vans, for this reason many dealers choose to expose the kits in their vans and give the customer the option to buy their van camperized. In this case the bed chosen for this van has been the basic bed kit to which they have added the optional exterior rear table which consists of installing four leg bases on one of the bed boards and eight locks to then store the legs hooked under the same board so that the bed kit is completely collected and the vehicle’s load capacity is not affected.


This video was the first explanatory video that we made of our beds for vans, year 2014, these beds for vans were the first version, in the updated beds for vans that we make incorporate significant improvements over this version, we have increased the thickness of the mattresses, modified the rails of displacement and bed boards, we have also incorporated covers on all upper chests, have added lower rails of displacement for the incorporation of other optional, Etc.

Many of our customers thank us with videos made by themselves in their own vans to receive the beds, in this case the customer has a Mercedes Viano long chassis or also called intermediate chassis, the 5 meters, the customer bought us a wide module bed kit and we took into account the technical data that he gave us in terms of the system that had installed for securing the load. This vehicle converted into a camper van is very versatile because in many cases these vans come with individual swivel armchairs in the second row which allows you to have a dining room of large dimensions just guiding the armchairs and mounting one of the two positions of the armchair that all our bed kits have as standard.

This video was made on a Volkswagen Transporter that one of our customers gave us so that we could adapt a bed for his van taking into account the specific characteristics of this unit and easily convert it into a campervan. This Volkswagen Transporter has a second heating unit in its cargo area as can be seen in the right bulkhead of the cargo area. Our beds for vans are adapted to the specific model you have, that is, not all Transporters are the same and you have to adapt the beds to each specific model so that the camperization of your van is a success and the bed is as tight as possible.

La Volkswagen Transporter Furgomania, this is how we call our own van, it is our company vehicle, this video was made in DelfinAuto, official Volkswagen dealer in the Canary Islands. The Volkswagen Transporter is one of the most used vans to transform them into camper vans and we have a very wide catalogue for it. For this camper van we have a multitude of configurations that allow you to have the van in the number of seats you need, from only two seats where you can optimize the load capacity and camper equipment that you can incorporate, through three seats, four or five, we have configurations for all possibilities so that your camper van or simply the bed you want to incorporate in your Volkswagen Transporter, adapts to the millimetre to your needs. The self-installing kits we have developed for this camper van represent the largest catalogue of our camper van products.

Video made in LevanteWagen, official Wolkswagen dealer in Valencia. Video del año 2013, los kits actuales tienen notables mejoras. The improvements that have been incorporated today to our beds for camper vans are:
1. – We have increased the thickness of the side mattresses leaving all the mattresses with 8 cm thick that added to the 4 mm thick fabric we use in our upholstery we get a total thickness of almost 9 cm, it must be said that the fabric we use is not a common fabric, it is a three-layer fabric, the outer layer, a central layer of sponge and an inner layer of mesh, it is a high quality fabric that makes our beds for vans are very comfortable. ¡
2.- We have modified the bed boards to make them thicker and at the same time lighter as we are using poplar plywood. 3.- We have modified all the side guides and added others to incorporate more options such as the large drawer that will make the camperization of your van more complete.

This video has been made in the Mercedes Benz dealer in Las Palmas de Gran Canaria, the chosen vehicle has been the T-Class which are the same as the Citan, we have made a camper equipment to maintain the load capacity of the vehicle as these vans and similar, have a fairly small boot. From our point of view these vehicles converted into camper vans must have the maximum load capacity possible because, as a general rule, when we go camping we usually carry many belongings of different sizes, which is why the cargo space should be clear and thus achieve that the camperization of this type of vans is adapted to the largest possible number of customers. However, for this vehicle we have made a boot bed kit that has a series of embedded nuts in its base from the factory so that later, to the customer’s taste, a series of options can be incorporated such as a three-drawer chest of drawers and also a removable tray to carry a fridge. The bed has a total length of 190 cm and an average width of 125 cm and can also be fitted with an interior and exterior table..

Video made by one of our customers of the bed purchased for his Volkswagen Caravelle T5 van, this bed for van is installed on the three-seater armchair of the last row, in this case the customer chose to remove the middle row of armchairs to have more space in his camper van but, without making any modification can install all the seats and have the same bed in your camper van. The third row bed kit is only available on certain models of Volkswagen vans and on the chassis of Renault Trafic, Opel Vivaro, Fiat Talento and Nissan NV300. The third row bed kit is a kit that allows a lot of space in the central area of the van but nevertheless greatly reduces the load capacity of our boot, however, this kit also allows the optional large drawer that significantly increases the load capacity and organization of it. This van bed has a total length of 190 cm across the entire width of the van in the boot area and approximately 140 cm across the rest of the bed surface.

Video made by one of our customers of the bed for a Mercedes V Class van long chassis or also called intermediate chassis, this kit is the wide module that has capacity for a refrigerator of 21.5 litres, specifically the Dometic Cf26, a water tank of 19 litres in addition to multiple spaces for objects or clothes. One of the features that we can highlight of this bed for van is that it comes standard with a top tipping bed base, i.e. the bed base is tipped over the top of the bed, mainly because the anchors to hold the bed kit are located at the front of the furniture, which makes it impossible to collect the bed base as normally requested by customers, which is the lower part as a bulkhead for loading objects or belongings that we carry under the bed, in the loading area. At the same time this bed base, like all of them, as well as having the possibility of forming the bed on the backrests of the rear armchairs also has the possibility of being supported on two legs and thus being able, at a given moment, to eliminate the rear armchairs and have more load capacity in our camper van.

Video made by one of our customers of the bed for a Volkswagen Transporter van, the self-installing kit chosen by our customer was in this case the basic module kit mainly because it had the need to have greater load capacity between module being this 90 cm wide by 50 cm high for the entire depth of the cargo area which is approximately about 140 cm. The basic module bed kit as well as the wide module bed kit has the capacity to hold the same 19 litre water tank. In this video the customer wanted to highlight the packaging of the product as it is one of the aspects that we take most care to ensure that the bed you buy for your van reaches your hands intact, we pack all our beds for vans in reinforced boxes so that there is no problem in transport to your home although in this case the customer wanted to go to the courier company to collect the product with a small trailer.

Adapters and screws for the relocation of the rear seats for the Renault Trafic 2015 model. System for the exclusive use of the bench seat as an extension of the bed. Under no circumstances for use by seated passengers when the vehicle is in motion. The adapters for the Renault Trafic 2015, although they are perfectly manufactured and many of our customers have already installed them successfully, they are not approved and will not be approved for the time being. Please be aware of this when purchasing this product. This video was made by one of our customers who opted for this option when camperizing his van and subsequently mounted a large bed in the back of the van, in the cargo area. These vehicles have this disadvantage, that is, they do not allow the exchange of seats as the previous model of these vehicles did, which is why, people who want to camperize their van with one of the two rear beds that we have in our catalogue, have to start by mounting these adapters although we also have a third option that allows you to install a bed in your van on the third row of seats.

Video provided by one of our customers showing the installation of a basic bed kit in his camper van, a Ford transit Custom without rear air conditioning, a specific self-installable kit for this model. In the video you can see the set of rails that come standard with all our beds for vans, these rails have several functions, that the bed boards do not come out displaced in a braking or accident, that we can place them in the lower rails to place them in the two positions of the chair, also we can place one of the boards as a backrest and finally also support the optional large drawer. These rails are manufactured in a single piece, that is to say, it is a single wooden board that by means of the numerical control machine we mill and give the specific shape and size in each of our beds for vans.

Video made by one of our customers in a Renault Trafic 2016. In this case our customers opted for the self-installing kit with a wide module plus the Dometic Cf26 fridge and a 19-litre water tank, which is the maximum capacity that this type of van bed allows in self-installing kits. These beds for vans are also available in a simpler model that we call basic module and both models support a number of options that are compatible such as the large drawer or the footboard.

Kit Cama en Renault Trafic 2016, video made in Renault Besalú, official Renault dealer in Catalonia. Video made in Catalan by one of the dealers who promote our products with their standard vans. The self-installing bed kit chosen for this camper van is the basic module bed kit. This camper van was previously fitted with the adapters for the exchange of armchairs as requested by the customer as he needed to increase the load capacity of the vehicle by collecting the armchair that was installed in the second row. The armchairs that these vehicles have in the second row are rigid, i.e. they do not allow the backrest to be folded down or the base to be folded forward, a disadvantage that means that these vans are not chosen by some customers when they think of camperizing.

This is how our camper van furniture is made, with computer-aided numerical control machines. All our kits are made with modern manufacturing systems so that the furniture comes out with the correct measurements for each camper van. Due to the wide catalogue we have, more than fifty models of beds for vans and their options, the numerical control cutting systems play a fundamental role. In this video the part being worked on is what we call the module rails or rails where the bed boards slide with their different configurations.

Kit 4in1, an optional bed unit for Volkswagen Transporter vans as well as for Ford Transit Custom and Tourneo Custom models. This kit incorporates a 30-litre drawer compressor fridge with interior regulation, either Dometic or Vitrifrigo fridges, two brands of highly efficient and very low consumption fridges. Underneath the fridge this kit has a drawer, not refrigerated, to store all kinds of belongings, it also incorporates a very useful exterior table as it is right at the entrance when we open the sliding door.

Basic bed kit Volkswagen Caravelle T5/T6 and T6.1, this van bed adapts perfectly to all the interior mouldings that the Volkswagen Caravelle comes with from the factory, these mouldings take up a lot of interior space around the perimeter of the cargo area of the van and for this reason it was not possible to incorporate a space for the water tank that normally all the basic kits that we manufacture for the other brands.

Wide module bed kit in Ford Tourneo Custom, these beds for these van models have two versions because the model has changed internally, the manufacturer Ford has modified the plastic covering or upholstery that covers the rear air conditioning unit which makes the bed for this van has two versions completely different from each other although in both the bed has almost the same width being this 190 cm long for the entire width of the van which is approximately 150 cm.

Bed kit for Renault Trafic, third row bed kit for the new Renault Trafic, Opel Vivaro, Nissan NV300 and Fiat Talento. This bed kit allows to use the last armchair to form the bed being necessary to remove the central armchair of the van to be able to deploy the bed forward and have a total length of 190 cm across the width of the van at the rear of the bed and about 140 cm in the part of the feet, we always recommend sleeping with the head in the area closest to the tailgate of the van.

Beds for Ford Tourneo Custom vans, front view of Kit wide module bed in the first model of Ford Tourneo Custom. The bed designed for this van is the first model we designed as this van model changed the interior configuration of the upholstery in its second version. This bed kit has space for a 21.5 litre fridge as well as a 19 litre fuel tank and several spaces for small items or clothes.

Camper vans, Toyota Proace Verso, Peugeot Traveller and Citroen Space Tourer, with Furgomania’s Self-Installing Camper Kits you can convert your standard van into a Camper Van fully prepared for camping with bed, fridge and other features in a few minutes, no tools required, no MOT required, and we send it to your home anywhere in Spain or Europe.

Self-installing bed for Ford Transit Custom, this is how to install our bed kits without tools, without instructions, completely by hand. Video made at Ford Lugo. Many official dealers buy our bed kits to convert their standard vans into camper vans and sell them equipped to customers. In any dealer you have this possibility, that is to say, the possibility of being able to buy your van and at the same time equip it with our furniture and finance it all in the same operation and thus have your camper van equipped from the purchase.

Basic bed kit for Transporter and Caravelle, with Furgomania’s self-installing camper kits you can convert your standard van into a camper van fully prepared for camping with bed, fridge and other features in a few minutes, no tools required, no ITV required, and we send it to your home anywhere in Spain or Europe.

Side view of the third row kit for Volkswagen Caravelle, this kit has the peculiarity that allows you to keep all rows of seats of the vehicle if you wish or also allows you to remove the middle row and thus have more space which is a very popular option for customers as this way they gain much space in the central area of the camper van obtaining a large central lounge ideal for enjoying the interior of the van those days when the weather is not good. This kit can be combined in its loading area with the large drawer that in this case only occupies the boot area of the third row seat to the tailgate, about 70 cm approximately. The kit can also accommodate two small water tanks, each with a capacity of 11 litres, and the rest of the space is used for two load compartments.

Rear view of the third row kit for Volkswagen Caravelle, this kit has the peculiarity that allows you to keep all the rows of seats of the vehicle if you wish or also allows you to remove the middle row and thus have more space which is a very popular option for customers as this way they gain a lot of space in the central area of the camper van obtaining a large central lounge ideal for enjoying the interior of the van those days that the weather does not accompany. This kit can be combined in its loading area with the large drawer that in this case only occupies the boot area of the third row seat to the tailgate, about 70 cm approximately. The kit can also accommodate two small water tanks, each with a capacity of 11 litres, and the rest of the space is used for two load compartments.

Front view of the third row kit for Volkswagen Caravelle, this kit has the peculiarity that allows you to keep all rows of seats of the vehicle if you wish or also allows you to remove the middle row and thus have more space which is a very popular option for customers as this way they gain much space in the central area of the camper van obtaining a large central lounge ideal for enjoying the interior of the van those days when the weather is not good. This kit can be combined in its loading area with the large drawer that in this case only occupies the boot area of the third row seat to the tailgate, about 70 cm approximately. The kit can also accommodate two small water tanks, each with a capacity of 11 litres, and the rest of the space is used for two load compartments.

Video made by one of our customers on a Peugeot Traveller size M, the customer opted for the wide module kit to have space for the 21.5 litre Dometic compressor fridge and a 16 litre water tank plus another 11 litre tank in the front cabinet. The customer wanted to add the bed base to have the possibility to remove the three second row seats and thus have more space since his hobby is the world of cycling and this way he has more space to carry the bike inside the camper van.

Basic bed kit for the M chassis of the Peugeot Traveler, Citroen Space Tourer, Opel Vivaro and Toyota Proace Verso, an option to camp your van that gives priority to the loading capacity of the vehicle, leaving 70 cm of width from furniture to furniture under the bed by 50 cm height and the entire length of the trunk available. This kit also allows you to house two small water tanks, one on each side, with a capacity of 11 liters, the rest of the available spaces are designed to house all types of objects or clothing. Like the wide module kit, this kit can be combined with the optional large drawer, footboard and others. Consult the catalog of these vehicles for more information on how to camp this van with the self-installable kits.

Dining bed kit for the Peugeot Traveler XS model, Citroen Space Tourer, Opel Vivaro and Toyota Proace Verso. This equipment allows you to keep all the rear seats and at the same time be able to remove them and continue enjoying your camper equipment but with more space available for cargo. This kit model is only available in this size of van, which is the shortest of the three sizes that exist.

Video of the Dining Bed Kit in the 2018 models onwards of Peugeot Rifter, Citroen Berlingo, Toyota Proace City and Opel Combo, this kit provides a bed of about 120 cm wide by 190 cm long. This kit can be combined with the optional Part Installation System that allows you to install this kit in parts, ideal for those people who do not have help to put the kit in or out of the vehicle or for those who only need some of its components. modules permanently installed in the vehicle.

Video in French made at LevanteWagen, official Volkswagen dealership in Valencia. Video from 2013, the current kits have notable improvements. The improvements that have currently been incorporated into our beds for camper vans are: 1.- We have increased the thickness of the side mattresses, leaving all the mattresses 8 cm thick, added to the 4 mm thickness of the fabric that We use in our upholstery we achieve a total thickness of almost 9 cm. It must be said that the fabric we use is not a common fabric, it is a three-layer fabric, the outer layer, a central layer of sponge and an inner layer of mesh, it is a high quality fabric that makes our van beds very comfortable. 2.- We have modified the bed boards making them thicker and at the same time lighter since we are using poplar plywood. 3.- We have modified all the side guides and added others to be able to incorporate more options such as the large drawer that will make the camperization of your van more complete.

New Peugeot Rifter Camper. Video made in collaboration with Peugeot where we show the two equipment that we have available for this camper van model. For this model of small camper van we have two pieces of furniture, the dining bed kit and the trunk bed kit and we have both for the short chassis and the long chassis of these models. However, we want to mention that from our point of view these vans have very little interior space to have the dining room in the cargo area, for that reason we have designed the dining room both in the loading area and in the front area so that we can take advantage of the same original armchairs from the vehicle to form the dining room.

Peugeot, Citroen, Toyota and Opel share this model in three chassis sizes. At FURGOMANIA we only work in the compact and medium sizes. This video is made from the photos provided by a client who bought a medium chassis to equip his camper. This client chose the wide module kit and added the optional shower kit. footboard and an access cover on one of the bed boards.

New Citroen Berlingo Camper. Video made in collaboration with Citröen where we show the two equipment that we have available for this Citröen model that you can convert into camper vans. Of the equipment in self-installable kits that we have developed for these vehicles, we usually recommend the trunk bed kits as they are the ones that make the most of the little space available in the cargo area of these vehicles. It should be mentioned that the cargo area of the short chassis Of these vehicles, which is the most common model, it has a total loading length of approximately 70 cm by 100 cm wide, so we must try to take advantage of this small space and respect it for loading.

Explanatory video made by one of the Citroen dealers that exhibit our products, the bed kit shown in this video is the basic bed kit that can accommodate a 16-liter water tank as well as multiple spaces for belongings or clothing. In addition, this bed kit allows you to place the bed boards in two chair positions, one facing forward and one facing the opposite direction, in the same way the bed boards can be collected and stacked at the front of the chair. bed kit to increase loading capacity.

Explanatory video intended for professionals in the sector where we explain the suitability of our beds for vans and the sales incentive of having them installed in the camper vans for sale, whether new or used. Many customers, upon seeing that the van has the possibility of converting it into a camper easily and quickly, decide more confidently to purchase a van.

VOLKSWAGEN Crafter F11, custom work carried out in the first stage of Furgomania when custom work was our daily routine, over the years we stopped doing custom work and focused on the development of self-insulating kits for 10 brands of vehicles, self-installable kits are a simple solution for medium-sized vehicles, which are our specialty.

Furgomania and its camper vans on Televisión Canaria. In our first stage we developed our activity in the Canary Islands, being the leading company in the sector at the time, from 2003 to 2010. As a consequence, the Canary Islands Regional Television made several reports about the work we carried out in those years.

Mercedes Sprinter F1, our personal vehicle. This vehicle, despite its age, purchased in 2007, is still a very special vehicle both as a vehicle itself since it is a 200 hp automatic Sprinter, as well as the very successful camperization done inside as it is a The smallest Sprinter of all, it only measures 520 cm in total length, which makes it a very versatile vehicle for everyday use despite its apparent large dimensions in a very practical vehicle. It is a vehicle that countless clients have wanted to buy from us but that we still have.

Mercedes Vito F2, the first mass-produced van for Mercedes in the Canary Islands, 2008. This camper van was a great success at the time and currently continues to be in demand by our customers since it is the smallest of the vans. Mercedes Vito, just 470 cm in total length which makes it an ideal vehicle for everyday use. The interior camper equipment consists of furniture made in the loading area of the vehicle and the space that is available at the entrance through the sliding door since we ordered these units from the factory only in 4 seats since we considered that for the majority of cases with 4 seats is more than enough.

Mercedes Vito F4, second model made in series for Mercedes in the Canary Islands, year 2008. This second model was also made on the more compact Mercedes Vito chassis, achieving a small camper van that is very versatile for daily use. This model was developed in 5 seats to cover the specific needs of the clients who required it. The vehicle has a large bed that occupies the entire width of the van and has a total length of 190 cm. It also has a 50 liter water tank located in the lower part of the chassis where we connect a shower with a pressure start hydro and all this located in an aluminum chassis made for this purpose that gives the vehicle its The part gave off a very attractive camper touch.

Furgomania on TV Canaria, from 2003 to 2010, in this period of years there were several reports that the regional television of the Canary Islands made about us because with our appearance the camper world became vitalized to a large extent. From 2003 to 2010 we made approximately 200 camper vehicles of all sizes and we always camped them to the client’s liking and based on their needs.

Kiteboarding championship, Furgomania collaborates with the first kiteboarding championship Gran Canaria 2017. Since the creation of Furgomania, our camper vans have been closely linked to the world of sports at sea, especially surfing, windsurfing and kitesurfing, our first vans were specifically designed for these sports since they require specific spaces to be able to combine sports equipment with the rest of the camper equipment and in this sense we specialized from the beginning.

Volkswagen & Furgomania, collaboration with the Wind Wave 2017 World Championship – Pozo Izquierdo – Gran Canaria, in 2017 we began with our company vehicle, a Volkswagen Transporter, to develop the largest catalog of auto installation kits that we currently have. We chose this vehicle because it is the most common vehicle in this world and because there are countless accessories on the market for it, such as rotating bases for the front seats, ventilation grilles, interior panels with infinite possibilities, etc.

Video from 2005, first prototypes of a removable self-installable bed, with the Furgomania Self-Installable Camper Kits you can convert your stock van yourself into a Camper Van fully prepared for camping with a bed, refrigerator and other features in a few minutes, You don’t need any tools, it doesn’t require an ITV, and we will send it to your home anywhere in Spain or Europe.

Video of the year 2006, Self-installable beds for Volkswagen Transporter, with the Self-installable Camper Kits from Furgomania you can convert your stock van yourself into a Camper Van fully prepared for camping with a bed, refrigerator and other features in a few minutes, you don’t need any tools, It does not require an ITV, and we will send it to your home anywhere in Spain or Europe.
