Third Row Bed Kit
This third-row bed kit is for those people who want to keep the second row of seats or not (it has both possibilities) in the case of keeping the second row of seats, the bed allows a total length of 182 cm with the second-row armchair mounted, but if you remove it, you can lengthen the bed up to 2 meters.
The third-row bed kit has space to house a 23.5-litre Dometic CF26 fridge, a 19-litre water tank and the rest of the spaces are used to store clothes or small objects.
Rear Bed Kit
This rear bed kit is for those people who want to keep the second row of seats, in this case, the bed only allows a total length of 182 cm., The kit has space to house a Dometic CF26 fridge of 23.5 liters as well as three water tanks of 19 liters per tank and the rest of the spaces have several spaces for objects and clothes.
Universal indoor outdoor table kit
This table is a kit that is valid for any camper van and especially recommended for those with three front seats and the impossibility of being able to rotate these armchairs.
It consists of a 120 cm long by 40 cm wide board with chamfered vertices to facilitate access from sliding doors, whether they are two or just one door.
The holes have been designed so that the user can hold the table in the event that for some reason they need it. The kit consists of a painted table top + tripod with support tube + conical support + protective storage cover + two tie-down straps.
Water tank
El depósito de agua es un opcional que siempre recomendamos, se trata de unas sencillas garrafas que pueden ser de 11, 16 o 19 litros dependiendo del espacio disponible en cada kit de cama.
En ciertos modelos de kits de cama permite meter un depósito dentro de cada módulo aunque en la gran maría de los casos solo es posible llevar un solo depósito dentro del módulo derecho del vehículo en un hueco específicamente diseñado para este propósito, este hueco lo hemos impermeabilizado con una pintura especial en su parte inferior para evitar humedades.
Hay clientes que adquieren varios depósitos y los ponen debajo de cama para así disponer de mayor autonomía. Los sistemas de ducha no los vendemos debido a su gran variedad de precios y calidades en el mercado, el sistema de ducha reflejado en este opcional es meramente representativo, no se incluye ni los tenemos disponibles.
Drawer for bed kit
Large drawer to insert into the KIT BED with approximate measurements of 1350mm long x 800mm wide x 165mm high. The large drawer is an optional option valid for practically all our self-installing bed kits. What this drawer achieves is to divide the loading area into two spaces, leaving an approximate height of 30 cm under the drawer. The drawer is served with a support leg for those people who are going to put heavy objects inside, this leg in most cases is not put on because the drawer is also served with two pieces of stainless steel that are installed on the side guides as reinforcement of them.
Access hatch
Access hatches They are very useful to take things under the bed without having to leave the vehicle, from these hatches three units can be installed, one on each bed board, but we consider that it is an unnecessary expense, most of our customers opt to place one on the central board of the bed although the ideal is to have one at each end but one is usually enough, It all depends on the number of objects we have under the bed and how we have them placed.
It should be added that the board that has the access hatch can be moved without any problem and in this way we also change the location of the access hatch.
This option is highly recommended when combined with the large drawer kit that we place under the bed since access to the drawer is greatly facilitated through this hatch.
Universal Tripod
Universal tripod to camper your van. You can add it to one of the bed tops and turn it into a table for both outdoor and indoor use
This option consists of adding a leg with a tripod-shaped base To one of the boards of the bed and thus achieve a second function with one of the boards of the bed, under the board is attached a base with conical lace where we introduce the tube that acts as a central leg and in the base is attached a tripod-shaped one that provides very good stability both for use inside the van and outside, This whole set is served in a practical bag that we can easily store since the tripod-shaped base folds in on itself.
Attached Outdoor Table Kit
Detachable table to be installed at the rear of the vehicle.
The kit consists of a table 80 cm long by 40 cm high, a folding leg adjustable in height, a table guide that is installed on the furniture and a cover where you can store the table.
The product is shipped with the table guide disassembled so that you can adapt it to your vehicle depending on the rear height of the vehicle.
This same table, by acquiring another guide, can also be used inside the vehicle, we will simply need to install the table guide wherever we want to use it.