Bed Kit for Third Armchair
Kit designed to be installed in the third row without modifying any element of your van. This bed kit to convert your van into a camper consists of furniture that is installed entirely in the small trunk behind the third row. On both sides there are two trunks that have a lid at the top that gives access to a cabin of considerable dimensions taking into account the little space available in the cargo area and in the lower part of the side dances you have the possibility of incorporating two 11-liter water tanks, one on each side. This camper kit provides a bed of 190 cm in total length across the entire width of the van, which is approximately 160 cm. The bed is supported on stainless steel pieces that we have designed to hook with the headboards of the armchair and on its edge it is supported on two legs.
Wide Bed Kit
Wide kit with space for fridge and shower (both optional). We offer you TWO models of kits to convert your new Trafic into a camper van. The new Trafic comes with a factory problem regarding the rear seats. We’ll explain: On the basis that you should always buy the 8-seater if you’re thinking about Camperize your van, you will run into the problem that the central armchair has a rigid back and consequently you will not be able to fold it to form the bed, well, Furgomania provides you with the solution to solve this problem but only if you acquire your kit at the same time. Call us and we’ll explain what the solution is to turn your traffic into a camper van.
Basic Bed Kit
Basic kit, bed with different armchair positions with shower (optional), if you need space for a fridge you have to go to the wide kit potion. We offer you TWO models of kits to convert your new Trafic into a camper van. The new Trafic comes with a factory problem regarding the rear seats. We’ll explain: On the basis that you should always buy the 8-seater if you’re thinking about Camperize your van, you will run into the problem that the central armchair has a rigid back and consequently you will not be able to fold it to form the bed, well, Furgomania provides you with the solution to solve this problem but only if you acquire your kit at the same time. Call us and we’ll explain what the solution is to turn your traffic into a camper van.
Add Footboard
The footboard is an optional that you can add to both the basic bed kit and the wide module bed kit, it is an option that you can add when buying the bed kit or later.
This option allows you to keep the rear seats and remove them at any given time and thus have more space in the central area of the vehicle. You can also add an optional one to the footboard that allows you to form a table.
When we use it as a footboard it is supported on two legs of bed height and when we use it as a table it is supported on another four legs of table height that we can use both inside and outside the van.
Normally the footboard is manufactured with the necessary dimensions so that the bed has a total length of 190 cm. Another peculiarity of the footboard is that we can manufacture it with two types of folding, we can manufacture it with a lower fold that acts as a loading bulkhead or we can configure it with an upper fold that allows us to have a longer length of load under the bed, a length that we sometimes need, for example, to be able to put surfboards or any other object that needs the entire length of load under the bed of our camper van.
Drawer for third armchair bed kit
Large drawer to be inserted into the BED KIT FOR THIRD ARMCHAIR. This drawer is located between the two trunks of the camper bed kit in the third row, the drawer divides the cargo area into two spaces, the lower space has a height of 30 cm and the drawer occupies the remaining 20 cm. Optionally, we can incorporate an access hatch in the upper board of the bed so that we can access the drawer from inside the van.
Universal indoor outdoor table kit
This table is a kit that is valid for any camper van and especially recommended for those with three front seats and the impossibility of being able to rotate these armchairs.
It consists of a 120 cm long by 40 cm wide board with chamfered vertices to facilitate access from sliding doors, whether they are two or just one door.
The holes have been designed so that the user can hold the table in the event that for some reason they need it. The kit consists of a painted table top + tripod with support tube + conical support + protective storage cover + two tie-down straps.
Water tank
El depósito de agua es un opcional que siempre recomendamos, se trata de unas sencillas garrafas que pueden ser de 11, 16 o 19 litros dependiendo del espacio disponible en cada kit de cama.
En ciertos modelos de kits de cama permite meter un depósito dentro de cada módulo aunque en la gran maría de los casos solo es posible llevar un solo depósito dentro del módulo derecho del vehículo en un hueco específicamente diseñado para este propósito, este hueco lo hemos impermeabilizado con una pintura especial en su parte inferior para evitar humedades.
Hay clientes que adquieren varios depósitos y los ponen debajo de cama para así disponer de mayor autonomía. Los sistemas de ducha no los vendemos debido a su gran variedad de precios y calidades en el mercado, el sistema de ducha reflejado en este opcional es meramente representativo, no se incluye ni los tenemos disponibles.
Adapters for backchair swapping
Adapters and screws for the relocation of the rear seats for the Opel Vivaro 2015 model. Exclusive use system to be able to use the bench as an extension of the bed. Under no circumstances should passengers be seated with the vehicle in circulation. The adapters of the Opel Vivaro 2015, despite being perfectly manufactured and already many of our customers, have already installed them successfully, are not approved and will not be for now. Be aware of this when purchasing this product.
Drawer Kit
The Drawer Kit It is an optional that is a large drawer that we can put under the bed both in the basic bed kits and in the wide module kits and also in the third row kits, the drawer will have in each case the necessary dimensions to fit under the bed and will always have the maximum width and length that the bed kit allows. The drawer has a height of 20 cm on the outside and 18 cm on the inside.
By putting this drawer under the bed it gives us the possibility of dividing the cargo area into two spaces, on the one hand we will have a drawer and under it we have about 30 cm of height for the rest of the load we need to carry.
This drawer is usually combined with the optional access hatch that allows us to access the drawer from inside the vehicle simply by lifting one of the mattresses from the bed (recommended)
Access hatch
Hatch to access the underside of the bed, at most we recommend having two hatches, one at each end of the bed.
Access hatches They are very useful to take things under the bed without having to leave the vehicle, from these hatches three units can be installed, one on each bed board, but we consider that it is an unnecessary expense, most of our customers opt to place one on the central board of the bed although the ideal is to have one at each end but one is usually enough, It all depends on the number of objects we have under the bed and how we have them placed.
It should be added that the board that has the access hatch can be moved without any problem and in this way we also change the location of the access hatch.
This option is highly recommended when combined with the large drawer kit that we place under the bed since access to the drawer is greatly facilitated through this hatch.
Universal Tripod
This option consists of adding a leg with a tripod-shaped base To one of the boards of the bed and thus achieve a second function with one of the boards of the bed, under the board is attached a base with conical lace where we introduce the tube that acts as a central leg and in the base is attached a tripod-shaped one that provides very good stability both for use inside the van and outside, This whole set is served in a practical bag that we can easily store since the tripod-shaped base folds in on itself.
Attached Outdoor Table Kit
Detachable table to be installed at the rear of the vehicle.
The kit consists of a table 80 cm long by 40 cm high, a folding leg adjustable in height, a table guide that is installed on the furniture and a cover where you can store the table.
The product is shipped with the table guide disassembled so that you can adapt it to your vehicle depending on the rear height of the vehicle.
This same table, by acquiring another guide, can also be used inside the vehicle, we will simply need to install the table guide wherever we want to use it.