High Kit
KIT for Mercedes Vito long chassis. Design with capacity for a CDF25 cooler with a capacity of 23 liters and 32 liters of water in two tanks, 19 + 13, as well as various compartments for all types of waxes. A kit that does NOT need the back chair to form the bed, you can make the bed with the installed one in its original position just by folding it forward. Assemble your kit without modifying anything on your Mercedes camper.
Universal indoor outdoor table kit
This table is a kit that is valid for any camper van and especially recommended for those with three front seats and the impossibility of being able to rotate these armchairs.
It consists of a 120 cm long by 40 cm wide board with chamfered vertices to facilitate access from sliding doors, whether they are two or just one door.
The holes have been designed so that the user can hold the table in the event that for some reason they need it. The kit consists of a painted table top + tripod with support tube + conical support + protective storage cover + two tie-down straps.
Water tank
El depósito de agua es un opcional que siempre recomendamos, se trata de unas sencillas garrafas que pueden ser de 11, 16 o 19 litros dependiendo del espacio disponible en cada kit de cama.
En ciertos modelos de kits de cama permite meter un depósito dentro de cada módulo aunque en la gran maría de los casos solo es posible llevar un solo depósito dentro del módulo derecho del vehículo en un hueco específicamente diseñado para este propósito, este hueco lo hemos impermeabilizado con una pintura especial en su parte inferior para evitar humedades.
Hay clientes que adquieren varios depósitos y los ponen debajo de cama para así disponer de mayor autonomía. Los sistemas de ducha no los vendemos debido a su gran variedad de precios y calidades en el mercado, el sistema de ducha reflejado en este opcional es meramente representativo, no se incluye ni los tenemos disponibles.
Drawer Kit
The Drawer Kit It is an optional that is a large drawer that we can put under the bed both in the basic bed kits and in the wide module kits and also in the third row kits, the drawer will have in each case the necessary dimensions to fit under the bed and will always have the maximum width and length that the bed kit allows. The drawer has a height of 20 cm on the outside and 18 cm on the inside.
By putting this drawer under the bed it gives us the possibility of dividing the cargo area into two spaces, on the one hand we will have a drawer and under it we have about 30 cm of height for the rest of the load we need to carry.
This drawer is usually combined with the optional access hatch that allows us to access the drawer from inside the vehicle simply by lifting one of the mattresses from the bed (recommended)
Access hatch
Access hatches They are very useful to take things under the bed without having to leave the vehicle, from these hatches three units can be installed, one on each bed board, but we consider that it is an unnecessary expense, most of our customers opt to place one on the central board of the bed although the ideal is to have one at each end but one is usually enough, It all depends on the number of objects we have under the bed and how we have them placed.
It should be added that the board that has the access hatch can be moved without any problem and in this way we also change the location of the access hatch.
This option is highly recommended when combined with the large drawer kit that we place under the bed since access to the drawer is greatly facilitated through this hatch.
Universal Tripod
This option consists of adding a leg with a tripod-shaped base To one of the boards of the bed and thus achieve a second function with one of the boards of the bed, under the board is attached a base with conical lace where we introduce the tube that acts as a central leg and in the base is attached a tripod-shaped one that provides very good stability both for use inside the van and outside, This whole set is served in a practical bag that we can easily store since the tripod-shaped base folds in on itself.
Attached Outdoor Table Kit
Detachable table to be installed at the rear of the vehicle.
The kit consists of a table 80 cm long by 40 cm high, a folding leg adjustable in height, a table guide that is installed on the furniture and a cover where you can store the table.
The product is shipped with the table guide disassembled so that you can adapt it to your vehicle depending on the rear height of the vehicle.
This same table, by acquiring another guide, can also be used inside the vehicle, we will simply need to install the table guide wherever we want to use it.
4-in-1 kit with fridge
The 4-in-1 Kit is the ideal complement to any van bed kit, it is installed without the need for tools, by attaching this module you will have the wonderful Waeco CD-30 refrigerator, undoubtedly one of the best compressor refrigerators on the market, efficiency and autonomy are assured, it also has a large drawer, It can accommodate the portable kitchen and many other utensils, it also has a folding table that can be extended to cook from the outside.
4-in-1 WC Kit
The 4-in-1 Kit is the ideal complement to any Furgomania bed kit for Mercedes, it is installed without the need for tools, in place of the single armchair in the second row of seats, it unfolds outwards a folding table that gives great service and comfort.
It includes a 10-litre Thetford Qube 335 Chemical Toilet and toilet already installed that is perfectly hidden under the lid of the chest and a large drawer in which all kinds of objects and utensils can be transported.
4-in-1 Chest Kit
The 4-in-1 Kit is the ideal complement to any Furgomania bed kit for Mercedes, it is installed without the need for tools, in place of the single armchair in the second row of seats, it unfolds outwards a folding table that gives great service and comfort.
It includes a spacious chest that will allow you to store and transport all kinds of objects and utensils, the interior measurements of the chest are 46 cm high, 59 cm long and 44.5 wide.
4-in-1 Kit with Sink
4-in-1 cabinet with sink to be installed to replace the single-seater armchair that is located next to the sliding door, the cabinet consists of two 12-litre tanks in addition to all the small accessories necessary for the operation of the sink. This piece of furniture is connected to a 12-volt cigarette lighter socket for the operation of the electric pump and does not need to install a second battery in the vehicle.