Wide Bed Kit with rear A/C
The Wide Module Bed Kit has been the furniture chosen to camper the Ford Tourneo L1, this Bed Kit like all bed kits takes advantage of all the space available in the cargo area of the van because it adapts to the entire interior contour of the van, this is how our bed kits are for all models, They adapt to all the nooks and crannies of the van to obtain not only the most optimal visual result but mainly to take advantage of the 100 x 100 of the space available in your camper van. The module on the right side is wider than the one on the left side because we allocated a space to put a portable fridge with a capacity of 21.5 liters and a water tank of 19 liters and still have more space to store clothes or small objects. The left cabinet also has several compartments, both at the top, which are provided with independent lids, and at the bottom, which is where we access the load securing points, which is the technical principle on which we base all our camper kits.
4-in-1 WC Kit
The 4-in-1 Kit is the ideal complement to any Furgomania bed kit for your camper van, it is installed without the need for tools, in place of the individual armchair in the second row of seats, it unfolds outwards a folding table that gives great service and comfort.
It includes a 10-litre Thetford Qube 335 Chemical Toilet and toilet already installed that is perfectly hidden under the lid of the chest and a large drawer in which all kinds of objects and utensils can be transported.
4-in-1 Trunk Kit
The 4-in-1 Kit is the ideal complement to any Furgomania bed kit in Ford camper vans, it is installed without the need for tools, in place of the individual armchair in the second row of seats, it unfolds outwards a folding table that gives great service and comfort.
It includes a spacious chest that will allow you to store and transport all kinds of objects and utensils, the interior measurements of the chest are 46 cm high, 59 cm long and 44.5 wide.
4 in 1 Fridge Kit
The 4in1 Kit is the ideal complement to any Furgomania bed kit for your camper van, it is installed without the need for tools, the kit is attached to the vehicle by means of a metal hardware that hooks at the bottom with the bed kit, it takes the place of the individual armchair in the second row of seats, it unfolds outwards a folding table that gives great service and comfort for example to cook with a portable kitchen.
The kit includes the Waeco CD-30 drawer fridge although we also installed the Vitifrigo which are of somewhat better quality, undoubtedly the best compressor fridges on the market, efficiency and autonomy are assured, it also has a large drawer at the bottom, in which you can accommodate a portable kitchen (not included) or any object you need to carry.
4-in-1 Kit with Sink
4-in-1 cabinet with sink to be installed to replace the single-seater armchair that is located next to the sliding door, the cabinet consists of two 12-litre tanks in addition to all the small accessories necessary for the operation of the sink. This piece of furniture is connected to a 12-volt cigarette lighter socket for the operation of the electric pump and does not need to install a second battery in the vehicle.
Front Table Kit
This simple kit brings a lot of utility to your van Both when you use it as a camper van and on a day-to-day basis, as all the kits we offer you are self-installable, in a few minutes and only by fixing four screws you can enjoy the comfort of the table that is removable, the table due to its size cannot be folded in the bulkhead where it is installed since it measures 80 cm long by 40 cm wide and where it is installed, There’s no room to fold it up.
Normally this table is installed in the left bulkhead of the van, which is where we do not have a sliding door, but if on that side we have a sliding door, it is also possible to install it, you just need to corroborate that when we open the sliding door it separates from the vehicle more than 2 cm, which is the space occupied by the table guide, since otherwise the table guide will rub against us on the outside of the van. the van.
Universal indoor outdoor table kit
This table is a kit that is valid for any camper van and especially recommended for those with three front seats and the impossibility of being able to rotate these armchairs.
It consists of a 120 cm long by 40 cm wide board with chamfered vertices to facilitate access from sliding doors, whether they are two or just one door.
The holes have been designed so that the user can hold the table in the event that for some reason they need it. The kit consists of a painted table top + tripod with support tube + conical support + protective storage cover + two tie-down straps.
Add Footboard
The footboard is an optional that you can add to both the basic bed kit and the wide module bed kit, it is an option that you can add when buying the bed kit or later.
This option allows you to keep the rear seats and remove them at any given time and thus have more space in the central area of the vehicle. You can also add an optional one to the footboard that allows you to form a table.
When we use it as a footboard it is supported on two legs of bed height and when we use it as a table it is supported on another four legs of table height that we can use both inside and outside the van.
Normally the footboard is manufactured with the necessary dimensions so that the bed has a total length of 190 cm. Another peculiarity of the footboard is that we can manufacture it with two types of folding, we can manufacture it with a lower fold that acts as a loading bulkhead or we can configure it with an upper fold that allows us to have a longer length of load under the bed, a length that we sometimes need, for example, to be able to put surfboards or any other object that needs the entire length of load under the bed of our camper van.
Water tank
El depósito de agua es un opcional que siempre recomendamos, se trata de unas sencillas garrafas que pueden ser de 11, 16 o 19 litros dependiendo del espacio disponible en cada kit de cama.
En ciertos modelos de kits de cama permite meter un depósito dentro de cada módulo aunque en la gran maría de los casos solo es posible llevar un solo depósito dentro del módulo derecho del vehículo en un hueco específicamente diseñado para este propósito, este hueco lo hemos impermeabilizado con una pintura especial en su parte inferior para evitar humedades.
Hay clientes que adquieren varios depósitos y los ponen debajo de cama para así disponer de mayor autonomía. Los sistemas de ducha no los vendemos debido a su gran variedad de precios y calidades en el mercado, el sistema de ducha reflejado en este opcional es meramente representativo, no se incluye ni los tenemos disponibles.
Drawer Kit
The Drawer Kit It is an optional that is a large drawer that we can put under the bed both in the basic bed kits and in the wide module kits and also in the third row kits, the drawer will have in each case the necessary dimensions to fit under the bed and will always have the maximum width and length that the bed kit allows. The drawer has a height of 20 cm on the outside and 18 cm on the inside.
By putting this drawer under the bed it gives us the possibility of dividing the cargo area into two spaces, on the one hand we will have a drawer and under it we have about 30 cm of height for the rest of the load we need to carry.
This drawer is usually combined with the optional access hatch that allows us to access the drawer from inside the vehicle simply by lifting one of the mattresses from the bed (recommended)
Access hatch
Access hatches They are very useful to take things under the bed without having to leave the vehicle, from these hatches three units can be installed, one on each bed board, but we consider that it is an unnecessary expense, most of our customers opt to place one on the central board of the bed although the ideal is to have one at each end but one is usually enough, It all depends on the number of objects we have under the bed and how we have them placed.
It should be added that the board that has the access hatch can be moved without any problem and in this way we also change the location of the access hatch.
This option is highly recommended when combined with the large drawer kit that we place under the bed since access to the drawer is greatly facilitated through this hatch.
Universal Tripod
This option consists of adding a leg with a tripod-shaped base To one of the boards of the bed and thus achieve a second function with one of the boards of the bed, under the board is attached a base with conical lace where we introduce the tube that acts as a central leg and in the base is attached a tripod-shaped one that provides very good stability both for use inside the van and outside, This whole set is served in a practical bag that we can easily store since the tripod-shaped base folds in on itself.
Attached Outdoor Table Kit
Detachable table to be installed at the rear of the vehicle.
The kit consists of a table 80 cm long by 40 cm high, a folding leg adjustable in height, a table guide that is installed on the furniture and a cover where you can store the table.
The product is shipped with the table guide disassembled so that you can adapt it to your vehicle depending on the rear height of the vehicle.
This same table, by acquiring another guide, can also be used inside the vehicle, we will simply need to install the table guide wherever we want to use it.